Menu-Manual Pinch Valves

Features

• High-pressure pinch valve design
• Heavy-duty polyester or Kevlar^® reinforced high-pressure sleeve is the only wetted part
• Sealed body design
• Full pressure rated body
  

Materials of Construction

• Ductile, steel, stainless steel bodies
• Bevel Gear 4:1, 8:1, 16:1, or 22:1 actuator
• ANSI B 16.5 Class 300 flanges
• Optional Class 150 flanges and metric flanges available
• Available Elastomers

Description

The Series 9000 high-pressure manual pinch valve is designed with ANSI Class 300 flange drilling.  The heavy-duty elastomer sleeves are reinforced with high strength nylon, polyester fabrics, or Kevlar^® material.  Several heavy-duty sleeve designs are available.  The elastomer sleeve will close even on solids, and the flexing action of the sleeve eliminates the possibility of scaling.  Two heavy-duty pinch bars close the sleeve.  All valve working parts are isolated from the process by the sleeve.  Combining these features with a sealed body design and no packing to maintain, results in a simple, rugged, no-hang-up, maintenance-free valve.

 Several bevel gear actuators are available for On/Off manual operation.

 In order to accommodate the higher working pressure design, the valve is normally sized one size larger to allow for the thick double wall high pressure sleeve.  As shown on the chart below, a 6” port size valve requires a 8” flange body size.  Series 9000 designs are also available in ANSI Class 150 designs, and are available with pneumatic, electric, or hydraulic actuators.